Monday, April 1, 2013

pH Curves in 60 seconds


pH curves are inherently hard things to get your head around but once you do getting it is very worthwhile, so here is my 1 minute guide to what working them out...
  1. Shape - Think of each curve as made up of 2 half curves and there are 4 possible half curves (weak acid, strong acid, strong base, weak base), the shapes will either be almost L shaped (Strong) or almost fallen over S shaped (weak) and either high (base) or low (acid). So, when drawing (or describing) a curve just think, what is in the conical flask before I started titrating and draw the half curve for that first, then think what am I adding to it from the burette and draw that sort of half curve next.
  2. Intial pH - is the pH in the conical flask before you added anything
  3. Estimate of final pH - this will be very close to the pH of whatever was in the burette but reduced a bit (if its a base) or increased (if its an acid)
  4. Equivalence volume - Volume it gets v steep
  5. Equivalence pH - Middle of v steep section
  6. Getting Ka from graph - At 1/2 equivalence volume the Ka = H+ (or pKa = pH)
  7. Where is there a buffering effect? - If you have a weak acid or a weak base, in the middle of the half curve for this solution the curve flattens for a bit, this is the buffering effect, this happens because there is a mixture of a weak acid and its conjugate base (or a weak base and its conjugate acid)
59, 60. Done

Naming Multifunctional Organic Molecules

If you are naming molecules with multiple functional groups your first priority is to keep the numbers low and then when you write the name you put them in alphabetic order.

So for example this molecule...


...is called,  3-Chloro-1-Iodo butane

This is right because

- it keeps the numbers low (the alternative is "2-chloro-4-Iodo", i.e. 1,3 is lower than 2,4)

- and we have put it in alphabetic order

There is a more complicated rule that groups have different priority based on their Mr but you don't really need to know that,

The other fact it is worth knowing is that if you have a functional group that must be on the end, mainly aldehydes and carboxylic acids, you wouldn't number these because they have to be on the end (obvs) but then when you put other functional groups on you can't start numbering these "end only" functional groups because that would make no sense, it which case you always assume that the "end only" functional group is at 1 and number from there and this overrides the rule about keeping the numbers low.

So for example... 


...is called, 4-Chloro-3-Methyl Butanoic Acid
NOT
1-Chloro-2-Methyl Butan-4-oic Acid

Even though the numbers are kept lower on the alternative name.

The only other thing worth remembering is that of you have more than one of a functional group it becomes, for example, 1,3-dimethyl or 1,3,3-trimethyl and then when you are alphabetising them you go by the "d" or "t" not "m" e.g. it would be "1,3-dimethyl-4-ethyl....." not "4-ethyl-1,3-dimethyl-....."

Isn't It Ionic?

Ionic or Covalent? What is electronegativity?

This is a fairly confusing area of A level Chemistry (Alanis Morissette certainly found it hard) so I thought I would put together a blog post to explain it.

Think of it this way, we need to measure the ability of atoms to draw electrons towards them (i.e. electronegativity) the only way of doing this is on a comparative scale, that is, compared to other atoms. Then all somebody did (the man who did it was called Linus Pauling) was to give this scale values. The reactivity series from GCSE is the same principle except that nobody has ever bothered to give reactivities values so it is still just a list.

Anyhow, if you are going to compare atoms electronegativity (and therefore assign values) you need to get in to a situation where two atoms are both trying to pull electrons towards them and see which one has the bigger pull.

The only place this happens is in a covalent bond. In a covalent bond the electrons are shared between the two atoms but the electrons will spend more time with the atom that has the greater pull and therefore we say that atom is more electronegative (than the other one it is bonded to).

So, by comparing the covalent bonds between every possible pair of atoms you get a hierarchy of pulling ability (electronegativity) which Linus Pauling assigned numbers to. On Pauling's scale, Fluorine is the highest (best at pulling electrons) and is assigned a value of 4.0 and Francium is the lowest (poorest at pulling electrons) at 0.7. All of this measurement is done by comparing pulling ability in covalent bonds.

So the definition has to be something along the lines of...

"Electronegativity is a chemical property that describes the tendency of an atom to attract electrons towards itself in a covalent bond".

So, "How can compounds that form ionic bonds have electronegativities?" I hear you ask.

Electronegativity is a property of an element, if the value is high (e.g. Chlorine, 3.2) the element will form covalent bonds with other atoms of high electronegativity, because they are both pulling really hard on the electrons and so end up sharing them, but will form ionic bonds with atoms of low electronegativity (e.g. Na, 0.9) because the chlorine has so much of a bigger pull on the electrons compared to the sodium that it ends up pulling the electrons towards itself completely and forming a negative ion, whilst the sodium loses its electron and ends up being a positive ion.

So, don't think of electronegativity as happening "in bonds". It is a property that controls what sort of bonds an atom will form.

The only loose end to tie up is how do we know sodium's electronegativity if it never forms covalent bonds (pure sodium forms metallic bonds and sodium compounds have ionic bonds). The answer to this is that even though sodium doesn't naturally form covalent bonds, in a lab it can be made to share electrons (i.e. form a covalent bonds) with other atoms so that its electronegativity can be measured.

My analogy for all this is tug of war competitions, I won't expand on it now but it does work pretty well.

....and in future Alanis, just buy less spoons.

Sunday, March 31, 2013

Bad Science - 2 - D:Ream, Things Can Only Get Better



"Things can only get better 
Can only get, can only get 
They get on from here 
You know, I know that 
Things can only get better"


D:ream, Things Can Only Get Better



In 1994, D:ream sang that "Things can only get better...", this is excusable as a catchy line in a pop song but in their midst was the man who would later become the high priest of physics - Dr Brian Cox.

As Dr Brian well knew things can, quite literally, only get worse. Due to a thing called entropy, given the symbol, S.

Entropy is a measure of the disorder of a system and for any closed system, the higher the entropy the higher the disorder. 

So for a closed system like the universe, total entropy must always increase, in other words, disorder can only increase, so things can only get worse.

Did the D:ream lead singer know any better? Did the D:ream lead singer care? I suspect not, after all, this was his one shot fame.

On the other hand Dr Brian, the beautiful smiling face of popular science, definitely knew better but as he was consigned to plonking away at the keyboards in the background (he is barely visible in the video above; and if you look at the picture below, it is not hard to see why the camera didn't focus in on him, he is on the far right) I suspect he didn't really have a say in it.




Brian Cox (far right) then... 

                                                    


  ....and now

So Brian, things don't get better, they invariably get worse, except for haircuts, which do appear to have improved over time.




Climate change just got serious


We've all heard it before, due to climate change summers will get warmer (woop, woop), there will be increased flooding (I live on a hill), polar ice caps will melt (they're only polar bears) but what about the indirect consequences of climate change.

The indirect effect of climate change is increased cost of food production including peanut butter, coffee, maple syrup, wine, honey and chocolate.

Yes, you read that right, CHOCOLATE! Climate change will affect the world wide production and therefore cost of chocolate.

So get off your backsides, turn off that TV, unplug the stereo and go and build a windmill.

This has just got serious.

Saturday, March 30, 2013

Death by Chocolate



The toxicity of a substance is generally judged by a property called LD50 or Median Lethal Dose. LD50 is the mass of a substance that would kill 50% of the population in g/Kg. It is often calculated in rats or mice and then applied to humans, so there is therefore some ambiguity and variation in the accuracy of the values. Nevertheless, it is the best assessment of toxicity we have.

Here are some examples of LD50s (in g/Kg)...

Table Salt, 3
Vitamin C, 11.9
Capsaicin (the hot stuff in chillis), 0.0472

Which brings us to chocolate.

Chocolate contains a chemical called theobromine that accounts for its toxicity, Due to the theobromine content chocolate's LD50 (in humans) is 77g/Kg. Effectively that means that 6Kg of chocolate is enough to kill 50% of the population of people weighing 12 Stone.

To put it seasonally, that is approximately 20 average easter eggs or 60 bags of mini eggs or 300 creme eggs.

Now if you think that is disappointingly low, think of your dog. The LD50 for chocolate in dogs is about 26g/Kg. This means that 1kg of chocolate is enough to wipe out a pretty large dog and considerable less is needed to cause it some serious problems. Dogs can't metabolise the theobromine as well as humans so it can easily build up in their system. If you are worried that your dog has been at your choccies then the symptoms of theobromine poisoning in dogs are nausea, vomiting, diarrhea, and increased urination progressing to cardiac arrhythmias, epileptic seizures, internal bleeding, heart attacks and finally, death

So over Easter, take it easy with the eggs but make sure you eat them before the dog gets them. It might feel selfish at the time but you are doing them a favour in the long run.

Friday, March 29, 2013

What's the point of gritting the roads?

Have you ever wondered why we grit the roads? I know the obvious answer here is because it makes the ice melt, but why?  Why does gritting the road cause the ice to melt? Well, here is the answer to that question on a molecular level.

Grit (or Halite) is sodium chloride with all the impurities from mining left in. When it is added to ice It causes the freezing point of water to be lowered. So at, say -5C, pure water is solid but water with a touch of NaCl is a liquid.

This is all to do with equilibria, imagine a puddle that's freezing, solid water in the puddle is in equilibrium with the liquid water in the puddle and as freezing is an exothermic process at this low temperature freezing is favoured over melting and the water freezes.

Adding salt to the liquid water means that you are effectively "reducing the concentration of liquid water" because now it is not pure water it is water and salt. What difference does make to the equilibrium? Well, reducing concentration of a reactant favours the production of that reactant so liquid water is favoured over solid water and ice isn't formed.

Is this a special property of ice? Nope, any substance that dissolves in water will do the job, it's just that grit is cheap.

This also explains another weird effect. If you add salt to ice the temperature drops significantly, it can get down to -10C. This is because melting is favoured and melting is endothermic so the process of melting removes heat from the surroundings and drops the temperature.

Feel free to bore your friends with this explanation every time a gritter drives past over Easter.